Fox Men's Bike clothing

Think you can't get a lightweight, breathable full-face helmet Think again. The Proframe RS Helmet is the new pack leader, lapping the competition in fit, function, and style. It offers class-leading fit and security care of the BOA fit system, while the increased ventilation and decreased surface contact area ratchet up the cooling properties of this savvy lid. In the event of a crash, the Mips Integra Split impact protection system when combined with the EPP liner with the EPS layer is designed to reduce rotational forces, keeping you more protected against injury on the trail. Additional features that elevate this helmet above the competition include a 3-position adjustable visor that works with goggles, an included removable under-visor GoPro mount, Fidlock magnetic closure for easy on-off, plus an ionic+ antimicrobial liner and cheek pads to help optimize fit. Welcome to the next-level protection of Proframe RS.

Proframe RS from Fox Racing.

Proframe RS Mhdrn from Fox Racing.

Insulated wet weather mountain bike jacket Ride on through wet, windy, and cold conditions with the Ranger Windbloc® Fire Jacket. This insulated mountain bike-specific softshell features Polartec® Windbloc® fabric at the shoulders and lower back to fend off the elements and provide the best in weather protection. It can take it too, with a tough polyester exterior and drop tail to handle that rear wheel spray and keep it off you. The zonal brushed fleece interior keeps the warmth where you want it, while the zippered pockets help keep your keys and wallet in place while you rip. With warmth assured, this is a jacket that performs just as well off the bike as it does on. - Polartec® Windbloc® sleeves and lower back provide maximum weather protection from wind, water and cold conditions - Tough polyester exterior and zonal brushed fleece interior - Ergonomically located zippered hand pockets with elastic interior pocket to keep your stuff in place - Elastic waist and cuffs for fit and comfort - Drop tail for MTB specific performance - Length (HPS): 29'', size large - Shell: 100% polyester lining: 100% polyester - Fill: 100% polyester

The all-new Union BOA® Shoes are set to take your mountain bike adventures to new, more adjustable, and sendier levels of "yew!" Get more power to the pedal and customize your fit to perfection with the dual BOA® Li2 system featured in these trail-ready shoes. Built with robust features including a molded cap design to protect against rock strikes, the Union mountain bike shoes handles the rigors of trail abuse with ease. With a lightweight and precise fit, the low-profile, custom-tuned midsole ratchets up your pedal grip and feel, giving you more comfort while you shred. Power to the pedal is optimized care of the molded internal stiffening plate, but it's not stiffness at the expense of off-bike comfort. Should you have to hike-a-bike around that downed tree, you're all good. The sole is designed using the Ultratac™ rubber compound, with the engineered tread pattern providing best-in-class grip and durability, while the 2-bolt cleat system is compatible with most major clipless pedal suppliers. Versatile and with understated style, Union BOA® Clipless MTB Shoes were born to rip, transitioning from sweet single track to your post-ride tailgate brews with ease. - Clipless mountain bike shoes with Boa® - Dual Boa® Li2 system secure, on-the-fly adjustability - Ultratac™ outsole balances grip and durability - Reinforced toe for protection against rock strikes

Designed with input from our pro mountain bike athletes, the Speedframe Pro Klif Helmet has earned Virginia Tech#s best rating (5 STARS) in its Bicycle Helmet Ratings program for a reason. This top-tier open-face mountain bike helmet offers a market-leading feature set to keep you protected every time you hit the trails. Top of that list is Mips, designed to reduce rotational motion and redirect forces away from your brain should you crash. Dual-density Varizorb# EPS bumps up that impact protection further by spreading forces of impact across a wider area. The 360-degree fit system and Fidlock SNAP helmet buckle ensure a perfect fit every time you ride, with a buckle that's a cinch to open and close, even with gloves on. The XT2 liner is antimicrobial and manages odor while wicking moisture away from the head, and is easily removed and washed should it need it. Goggles pair well with the Speedframe Pro Helmet too, thanks to the 3-position adjustable visor. If you're looking for a performance-minded trail helmet, congratulations#you just found your new lid.

- Tough polyester exterior and brushed fleece interior - Ergonomically located zippered hand pockets with elastic interior pocket to keep your stuff in place - Elastic waist and cuffs for fit and comfort - Drop tail for MTB specific for performance - HPS 29'' - Shell: 100% polyester lining: 100% polyester - Fill: 100% polyester

Total Coverage The Titan Sport Jacket raises the bar on what full-body, under jersey guards can be. The full stretch-fabric main body offers a precise, bunch-free fit for maximum mobility while riding, while the intelligently engineered ventilation zones and articulated construction ensure freedom of movement while keeping you cool as you ride. The removable back protector can also be worn separately using the included shoulder straps. This piece is ideal of either mountain bike or dirt bike riding. Features - Highly ventilated and articulated polymer construction for all-day comfort and protection - Enhanced fit and comfort through moisture-wicking and highly breathable stretch-fabric body - Removable back protector can be worn separately using included shoulder straps - Anatomic high impact two piece plastic chest plate provides excellent coverage without restricting movement - High impact plastic shoulder and elbow coverage - Center zipper for easy on and off Certifications - CE EN 1621-1 LEVEL 1 Certified elbow and shoulder protection - CE EN 1621-2 LEVEL 1 Certified full back protection - CE EN 1621-3 LEVEL 1 Certified divided chest protection

The all-new Union Clipless Shoes are set to take your mountain bike adventures to new and sendier levels of "yew!" Built with robust features including a molded cap design to protect against rock strikes, the Union mountain bike shoes handles the rigors of trail abuse with ease. With a lightweight and precise fit, the low-profile, custom-tuned midsole ratchets up your pedal grip and feel, giving you more comfort while you shred. Power to the pedal is optimized care of the molded internal stiffening plate, but it's not stiffness at the expense of off-bike comfort. Should you have to hike-a-bike around that downed tree, you're all good. The sole is designed using the Ultratac™ rubber compound, with the engineered tread pattern providing best-in-class grip and durability, while the 2-bolt cleat system is compatible with most major clipless pedal suppliers. Versatile and with understated style, Union Clipless MTB Shoes were born to rip, transitioning from sweet single track to your post-ride tailgate brews with ease. - Clipless mountain bike shoes - Low-profile Velcro strap and lace system - Ultratac™ outsole balances grip and durability - Low-profile Velcro strap and lace system - Reinforced toe for protection against rock strikes

Cold Weather Mountain Bike Pants The Flexair Pro Fire Alpha Pants are a real game-changer. Featuring insulation with adaptable breathability, the need to shed layers on the move is virtually eliminated. Super-light, and boasting moisture-wicking fabric to keep you dry plus DWR finish to shed moisture, dirt, and debris, these pants move well and climb as efficiently as they descend. Features - Polartec Alpha insulation features adaptable breathability that helps eliminate the need to shed or add layers while on the move - Proven race-ratchet closure provides a secure fit and quick on-the-fly adjustments - Secure-zip hand pockets - Tapered lower leg reduces snag and drag - TruDri fabrics move sweat away from the body to keep you dry - DWR finish sheds moisture, dirt, and debris - Inseam: 31.75" Construction - Shell: 88% nylon / 12% spandex - Insulation: Polartec Alpha 100% polyester

When you're battling the elements, you want gear that'll help you defeat them, handily. The Ranger Fire Jacket offers the ultimate in cold-weather protection, and features a three-layer shell with a tough polyester exterior, an internal membrane for additional protection, and a brushed fleece interior to ratchet up the warmth. With its drop trail to ward off trail debris and ample pockets to stash your stuff, this versatile jacket is the jacket of choice for riders who look at dropping temps, say "no days off", and get after it. Best of all, it's just as at home off the bike as on.

A secure pack to get all of your gear to the next ride The Transition Pack is a true kit hauler. Its large storage capacity means you can fit in multiple full kits, including room for a helmet, guards and footwear. But it's not just ride gear. The fleece lined pocket keeps your valuables safe, while the padded sleeve is like a pillow for your laptop. Perfectly sized to fit in most airline overhead compartments, this is the perfect bag for riders on the move. - Fleece lined pocket for keeping valuables safe - Padded laptop sleeve for travel convenience - Ripstop nylon construction to handle the demands of traveling - Compression mesh stash pockets for on-the-go-storage - DIMENSIONS - Capacity: 45 L

The Launch Elite Knee Guards offer an excellent combination of impact-absorbing protection with a fit that ensures mobility while riding. The CE-certified D3O LP1 inserts provide world-leading impact protection, while the engineered SuperFabric skid panels deliver maximum durability and flexibility. Bonded Poron pods at the side of the sleeve give additional side knee coverage. Lightweight, and construction in a minimal sleeve-style, they'll bump up the comfort and flexibility while on the bike without sacrificing protection from trail hazards. Large elastic gripper panels help keep the guards in place while riding or during impact, and the material features an antimicrobial treatment to reduce odor-causing microbes. Shred with confidence with the protection of our Launch Elite Knee Guards.

Durability you can trust with additional storage for all day park laps. - Zippered hand pockets provide storage for all-day park laps - Cordura® fabric knee panels for increased abrasion resistance - TruDri® fabrics move sweat away from the body to keep you dry - TruMotion® all-way stretch fabric offers full range of mobility - Proven race-ratchet closure provides secure fit and quick on-the-fly adjustments - Tapered lower leg with stretch mesh inset reduces snag and adds cooling - Laser cut perforations front and rear provide increased cooling - Durable Water Repellent finish sheds moisture, dirt, and debris

TECHNICAL ZIP HOODIE TO BEAT THE CHILL There's warm and then there's the kind of warm you get from the Dayton Zip Hoodie. Constructed using Polartec® Thermal Pro® advanced shearling fleece, this hoodie means business when it comes to getting you warm in a hurry. Our most technical hoodie, it features Cordura® at the shoulders and elbows to up its level of weather protection, plus increase durability. Versatile and ready to work when the temperatures plummet, the Dayton Zip Hoodie is the ultimate cold weather protection-just zip it up and carry on in total warmth and comfort.

Game changer: super light, tapered fit—this pant climbs as well as it descends.

An Insulated MTB-Specific Softshell Jacket That Performs Just As Well Off the Bike The Ranger Fire Jacket fuses a comfortable and moisture-wicking brushed fleece interior with a durable polyester exterior shell. Ergonomically placed zippered hand pockets ensure your essential trail items are always close by, and the mountain bike-specific drop tail provides additional protection from mud, snow, and other debris during your cold-weather rides. - Tough polyester exterior and brushed fleece interior - Ergonomically located zippered hand pockets with elastic interior pocket to keep your stuff in place - Elastic waist and cuffs for comfort - Drop tail for MTB-specific coverage - Length (HPS): 29", size large MATERIALS - 95% polyester, 5% spandex

The all-new Union Flat Shoes are set to take your mountain bike adventures to new and sendier levels of "yew!" The flat-pedal version of the Union mountain bike shoes sticks confidently to your platform pedals and should you come into a corner with too much pepper, let you easily stick a foot out and steady the ship. Built with robust features including a molded cap design to protect against rock strikes, the Union Flat shoes handles the rigors of trail abuse with ease. With a lightweight and precise fit, the low-profile, custom-tuned EVA midsole ratchets up your pedal grip and feel, giving you more comfort while you shred. Power to the pedal is optimized care of the molded internal stiffening plate, but it's not stiffness at the expense of off-bike comfort. Should you have to hike-a-bike around that downed tree, you're all good. The sole is designed using the Ultratac™ rubber compound, with the engineered tread pattern providing best-in-class grip and durability. Versatile and with understated style, Union Flat MTB Shoes were born to rip, transitioning from sweet single track to your post-ride tailgate brews with ease. - Flat pedal mountain bike shoes - Ultratac™ outsole balances grip and durability - Custom hex shaped lugs engage with flat pedal - Reinforced toe for protection against rock strikes

FULLY SEAM-SEALED WATERPROOF/BREATHABLE FABRIC TO KEEP YOU DRY ON THE TRAIL. - Advanced weather protection for a wide range of weather conditions - Lightweight 10K/3K 2.5-layer, waterproof, breathable main body fabric - DWR finish sheds moisture, dirt, and debris - Two zippered front hand pockets - Draw cord, cinching at hem and elastic cuff, provides customized fit - Helmet-compatible hood fits over most helmets - Shell material made with recycled materials

The Speedframe MIPS Helmet has premium features usually meant for much more expensive helmets. A MIPS liner, goggle compatible 3-position visor, and our 360-degree fit make the Speedframe one of the best values in an open-face mountain bike helmets. Add in the legendary aggressive Fox design DNA, and you have one of the most shred-ready mtb helmets in the market today. - Proven MIPS impact protection system reduces rotational forces in a crash - Removable, washable moisture-wicking comfort liner - Optimized venting with channeled, in-molded EPS provides efficient cooling - Goggle compatible 3-position adjustable visor - 360 fit system allows you to dial in your perfect fit every ride - Note: Avoid exposure to aerosol sprays like bug repellent and sunscreens as they can cause your helmet's finish to peel - Weight: 360 g, medium

The Speedframe Helmet has premium features usually found only on much more expensive helmets. A Mips liner designed to reduce rotational motion and redirect forces away from your brain should you crash, a goggle-compatible 3-position visor, and our 360-degree fit system makes the Speedframe one of the best values in open-face mountain bike helmets. Add in the legendary aggressive Fox design DNA, and you have one of the most shred-ready mountain bike helmets on the market today.

The Launch Elite Elbow Guards offer an excellent combination of impact-absorbing protection with a fit that ensures mobility while riding. The CE-certified D3O LP1 inserts provide world-leading impact protection, while the engineered SuperFabric skid panels deliver maximum durability and flexibility. Lightweight, and constructed in a minimal sleeve style, they'll bump up the comfort and flexibility while on the bike without sacrificing protection from trail hazards. Large elastic gripper panels help keep the guards in place while riding or during impact, and the material features an antimicrobial treatment to reduce odor-causing microbes. Shred with confidence with the protection of our Launch Elite Elbow Guards.

A Lightweight 4-Way Stretch MTB Short Designed For Max Breathability The Flexair Shorts are incredibly lightweight and comfortable. Constructed using our TruMotion 4-way stretch fabric, they rapidly wick perspiration and flex to give you a feeling of freedom unlike any mountain bike short you've ever worn. Strategically placed laser-cut perforations increase comfort further by providing exceptional breathability. Features - Lightweight 4-way stretch fabric - Engineered airflow zones for all-day riding comfort - Removable liner with dual-density chamois for improved saddle comfort - Proven race ratchet closure provides a secure fit and quick on-the-fly adjustments - Secure-zip hand pockets - Bonded hem with over-taping detail is low-profile and reduces chaffing - TruDri fabrics move sweat away from the body to keep you dry - Durable Water Repellent finish sheds moisture, dirt, and debris - Screenprint logos - 13" Inseam Construction - Shell 76% polyamide nylon / 13% polyester / 11% elastane - Lining 87% polyester / 13% elastane

Podium proven performance built for durability.

Tougher Than Dirt The Defend short combines durability and 4-way stretch to keep you agile on the climb and covered on the descent. Ride with the Defend mountain bike short and push your limits on the toughest trails. Features - Ratchet closure provides a secure fit & quick on-the-fly adjustments - Secure zip hand pockets - TruMotion all-way stretch fabric for increased mobility - Body-mapping laser-perforated areas on front & back keep you cool - Durable Water Resistant finish sheds moisture, dirt, & debris - Inseam: 14.5" size large Fabric - 94% polyester / 6% elastane

The ultimate in speed and performance.

Technical performance that works on and off the bike.

Guards against those elbow blows The Enduro Pro Elbow Guards are designed to give you the confidence of maximum protection against sneaky trail blows from branches and more, while minimizing the extra bulk and weight so you can still move freely. Slide them on and rip down the trail, and in no time you’ll be singing the praises of the moisture-wicking micro-Lycra sleeve that breathes easy and keeps you fresh. The custom-molded D3O® elbow insert will take whatever your next run throws at you, so go ‘bows out, flat out, and shred with confidence in the Enduro Pro Elbow Guards. - Designed to offer maximum protection while minimizing bulk and weight - Moisture wicking micro-Lycra sleeve with nylon mesh forearm panel for increased airflow - Custom molded D3O® elbow inserts designed by and exclusive to Fox - Slip-on design for reduced bulk - Silicon grip top and bottom to hold the guard in place - D3O® elbow inserts are removable for convenient and quick washing - Elbow inserts are EN1621-1 Level 1

Knee guards built to pedal and protect. You want that knee protection, but you don't want to sacrifice mobility and pedal efficiency. The Enduro Pro Knee Guards are designed to deliver maximum 'hard knock' protection while keeping the bulkiness to a minimum. Slip them on and they'll stay right where you put them thanks to the rear elastic strap and silicon grip. Sweat isn't an issue either, thanks to their moisture-wicking material and mesh rear panel to keep the air flowing while you shred. - Designed to offer maximum protection while minimizing bulk and weight - Moisture-wicking micro-Lycra sleeve with nylon mesh rear panel for increased airflow - Custom molded D3O® knee inserts designed by and exclusive to Fox - Slip-on design for reduced bulk - Rear elastic strap and silicone grip top and bottom to hold the guard in place - D3O® knee inserts are removable for convenient and quick washing - Knee inserts are EN1621-1 Level 1 - Note: No technology or product can fully prevent the risk of injury or death

A STYLISH, PACKABLE, LIGHTWEIGHT PUFFY JACKET There’s nothing quite like the instant warmth of a puffy. The Howell Puffy Jacket is a light and totally packable jacket that’ll bring the warmth on those cold days. Keep it in your daily driver for a chill emergency, or wear it all-season long, you can’t go wrong with the reliable warmth of a puffy. - Lightweight construction - Stuffed with a 100 g synthetic fill for extra warmth - Tall collar to help lock in warmth - Full-length center front zipper - Side hand pockets MATERIALS - 100% polyester poplin high-count full dull - 100 g soft poly fill

Technical performance that works on and off the bike.

When you're flying down that gnarly overgrown trail, the Flexair Arcadia Long Sleeve Jersey has got you covered, bringing some legendary Fox energy and performance to your ride with a design that looks as fast as it feels. With its coveted Flexair breathability and TruDri sweat-wicking fabric to keep you cool and dry, it also boasts construction details that'll ensure total mobility to dodge on a dime. Should you mistime your dodge, the abrasion-resistant sleeves and panels on the shoulder will guard your limbs against those errant trail flings.

Our Enduro Knee Sleeves are trail tuned and offer pedal-friendly protection on the trail. Made from a moisture-wicking micro-lycra material and featuring a nylon mess rear panel, they keep the air flowing as you pedal up and earn the down. They allow full range of motion, thanks again to that high-stretch rear panel, and keep your knees safe from hard trail knocks with the removable D3O elbow inserts that deliver both protection and comfort as you ride. - Moisture wicking micro-lycra sleeve with nylon mesh rear panel for increased airflow - Removable D3O knee inserts for the perfect balance of comfort and protection - Silicone grip top and bottom to hold the guard in place - Nylon, spandex micro lycra

Flight Helmet from Fox Racing.

Packable, lightweight jacket designed for versatility in changing conditions.

Ultralight, Movement-Friendly MTB Elbow Guards The Enduro D3O Elbow Guard offers our highest level of protection in an ultra-light, pedal-friendly design. The slip-on design with CE-certified D3O impact-absorbing inserts provides you with minimal restrictions and maximum benefits. Features - EN1621-1 Level 1 Elbow including high and low-temperature conditions - CE certified D3O insert for world-leading impact protection - Moisture-wicking, open stretch mesh at back of knee for breathability - Cordura fabric offers higher abrasion resistance in key impact areas - Reinforced skid plate reduces friction with the ground in a sliding fall - Removable D3O Insert for easy washing Construction - 70% PU / 20% polyester / 10% nylon

The ultimate in speed and performance.

The Flexair Pro Jersey is injected with no-compromise features that bring the best technology to a free-flowing, durable mountain bike jersey. Maximum cooling comes from the ultra-light, moisture-wicking main body, while abrasion resistance and venting come care of carvico sleeves. Its tailored fit allows for plenty of unrestricted movement, leaving you free to confidently tussle with the rough stuff in this high-performance jersey.

Slip-On Elbow Guards Designed with D3O The Launch D3O Elbow Guard offers an excellent combination of impact-absorbing protection with a value-focused build. The CE-certified D3O insert works seamlessly with the slip-on design of the guard to provide all-day comfort and the confidence to try new trails. Features - CE certified D3O insert for world-leading impact protection-?EN1621-1 Level 1 CE Certification - Pre-curved ergonomic fit - Slip-on fit with hook-and-loop adjuster - Perforated neoprene offers comfort & breathability Construction - 20% nylon / 40% SBR / 30% PU / 5% polyester / 5% spandex

High-Performance Mountain Bike Jersey With Best-In-Class Moisture Wicking The Ranger Powerdry MTB Jersey features Polartec Powerdry fabric to pull moisture away from your skin, transferring it to the quick-drying exterior of the jersey. This technologically advanced material ensures you stay cool and dry on even the warmest and longest trail rides. - Polartec Power Dry fabric for exceptional moisture management - Full garment utilizes recycled fabrics - Rear hidden zip pocket for keys and cards - Taped seams in high-wear zones - Mountain bike-specific tailoring - Drop tail back panel for bike-specific coverage - Length (HPS): 31, size large

The Most Essential Part of Your Ride The Tecbase Liner Short is an essential piece of riding gear. The dual-density EVO chamois provides excellent comfort on any ride. The lightweight 4-way stretch mesh keeps the air moving, and flatlock seams ensure all-day comfort on the toughest rides. Features - Dual-density EVO Chamois for increased comfort in the saddle - Silicone thigh grippers prevent ride-up - Lightweight 4-Way stretch mesh provides all-day comfort - Flat-locked seams are low-profile for extra comfort - Jacquard fox elastic waistband - Inseam: 8.25" Construction - 80% polyamide nylon / 20% elastane

Technical MTB That With Ample Pocketing The Ranger Utility Shorts pack mountain-bike-specific technology into a casually styled short that performs both on and off the bike. The utility version features additional pockets and waterproof zippers to keep your essential gear safely stored. Features - Removable liner with dual-density chamois for improved saddle comfort - Stretch ripstop fabric maximizes performance on every ride - Goggle-strap-inspired low-profile waist-adjustment system ensures a perfect fit - TruDri-lined waistband moves sweat and moisture away from the body keeping you comfortable and dry - Two utility pockets (one zippered) to stash everything you need for a ride - Durable Water Repellent finish sheds moisture, dirt, and debris - Screen printed Fox Head - Inseam: 13" Construction - Shell: 57% polyamide nylon / 38% polyester / 5% elastane - Lining: 83% polyester / 17% elastane

- TruDri fabric moves sweat away from the body to keep you dry and comfortable - Full garment utilizes recycled fabrics - Tailored bike specific cut with drop tail and sleeves built to accommodate guards

Built for hauling down the trail at blur speed with a look to match, the Defend Cekt Jersey delivers podium-proven race performance with style. With TruDri fabric to wick away sweat and keep you cool and dry, the Defend mountain bike jersey is made from recycled fabrics, has a trail-specific cut, and comes with a drop tail for coverage on the move.

Our Enduro Elbow Sleeves are trail tuned and offer pedal-friendly protection on the trail. Made from a moisture-wicking micro-lycra material and featuring a nylon mess rear panel, they keep the air flowing as you pedal up and earn the down. They allow full range of motion, thanks again to that high-stretch rear panel, and keep your elbows safe from hard trail knocks with the removable D3O elbow inserts that deliver both protection and comfort as you ride. - Moisture wicking micro-lycra sleeve with nylon mesh rear panel for increased airflow - Removable D3O elbow inserts for the perfect balance of comfort and protection - Silicone grip top and bottom to hold the guard in place - Nylon, spandex micro lycra

Designed to keep you warm on long winter rides, the Defend Pro Fire Glove features a low-profile fit and water-resistant materials. The DWR treatment sheds water and works to keep your gloves clean and dry while the waterproof Clarino leather palm maintains a grip on wet rides. Touchscreen compatibility is an additional feature for taking those epic mid-ride photos when the weather breaks. - Axe Suede slim fleece waterproof palm to keep your hands dry and warm - Durable Water Repellent finish sheds moisture, dirt, and debris - Longer compression molded cuff for a secure fit that keeps the elements out - Conductive thread at index finger and thumb for touchscreen compatibility - 3 Layer softshell fabric to protect against the toughest elements

Premium low profile winter gloves treated with DWR Designed to keep you warm on long winter rides, the Defend Pro Fire Glove features a low-profile fit and water-resistant materials. The DWR treatment sheds water and works to keep your gloves clean and dry while the waterproof Clarino leather palm maintains a grip on wet mountain bike rides. Touchscreen compatibility is an additional feature for taking those epic mid-ride photos when the weather breaks. - Axe Suede slim fleece waterproof palm to keep your hands dry and warm - DWR finish sheds moisture, dirt, and debris - Longer compression molded cuff for a secure fit that keeps the elements out - Conductive thread at index finger and thumb for touchscreen compatibility - 3-layer softshell fabric to protect against the toughest elements - Slip-on glove style

When you're flying down that gnarly overgrown trail, the Flexair Arcadia Jersey has got you covered, bringing some legendary Fox energy and performance to your ride with a design that looks as fast as it feels. With its coveted Flexair breathability and TruDri sweat-wicking fabric to keep you cool and dry, it also boasts construction details that'll ensure total mobility to dodge on a dime. Should you mistime your dodge, the abrasion-resistant sleeves and panels on the shoulder will guard your limbs against those errant trail flings.

A Technical Mountain Bike Short That Works On and Off the Bike The Ranger MTB Shorts pack mountain-bike-specific technology into a casually styled short that performs both on and off the bike. The stretch Ripstop fabric ensures maximum performance and superior durability. The waist adjusters are easy to adjust and extremely comfortable. The inner waistband features TruDri technology to move moisture away from your skin and keeps you cooler and drier. Features - Removable liner with dual-density chamois for improved saddle comfort - Stretch ripstop fabric maximizes performance on every ride - Goggle-strap-inspired low-profile waist-adjustment system ensures a perfect fit - TruDri-lined waistband moves sweat and moisture away from the body keeping you comfortable and dry - Secured zip pocket to stash everything you need for a ride - Durable Water Repellent finish sheds moisture, dirt, and debris - Sublimated camo print, Fox Head screen print - Inseam: 12" Construction - Shell: 57% polyamide nylon / 38% polyester / 5% elastane - Lining: 83% polyester / 17% elastane

With all the comfort of your favorite t-shirt paired with all the performance qualities of technical fabric, the Ranger TruDri Jersey lives to keep you cool on the trail. Constructed from TruDri fabrics designed to wick sweat away from your body as you ride, plus Jacquard detail for added ventilation, this best-value performance jersey looks great both on and off the bike. Tailored with a mountain bike fit, including a drop tail panel to offer coverage as you move around on your bike, it'll fast become your new favorite jersey for rides with your crew.

Technical performance that works on and off the bike.

The Defend Fire Glove provides excellent all-weather performance for all but the wettest rides. The brushed Cordura top-hand material offers superior durability with a warm, comfortable, and water-resistant build. This protective outer shell is combined with an Ax Suede slim fleece palm for warmth without sacrificing bar feel. The addition of TPU-lined material in the gussets (the place between the fingers), and a durable water-repellent finish seals out the elements further. - Protected by D3O - Fleece lined for warmth in cold conditions - Compression molded cuff with hook-and-loop closure for secure fit - Absorbent micro-suede thumb - Ax Suede slim fleece palm keeps hands warm and dry - Brushed Cordura back of hand material offers abrasion resistance and warmth - TPU-lined finger gussets seal out the elements - Durable Water Repellent finish sheds moisture, dirt, and debris

When you're flying down that gnarly overgrown trail, the Flexair Novah Jersey's got you covered, bringing some legendary Fox energy and performance to your ride with a design that looks as fast as it feels. With its coveted Flexair breathability and TruDri sweat-wicking fabric to keep you cool and dry, it also boasts construction details that'll ensure total mobility to dodge on a dime. Should you mistime your dodge, the abrasion-resistant sleeves and panels on the shoulder will guard your limbs against those errant trail flings.

Technical performance that works on and off the bike.

The Flight Helmet takes the traditional dirt-jump lid to all-new levels of protection, performance, and comfort. The M9 Multi-Sector liner uses 9 distinct segments for improved fit, comfort, and superior breathability. Additionally, it is made using our proprietary Varizorb Multi Density EPS foam which absorbs, disperses and reduces the force of impact to the head in crashes. - Dirt-jump and trail-specific functionality - M9 segmented EPS design for improved fit, flexibility, and comfort - Varizorb multi-density EPS liner provides improved protection - Thin ABS shell for reduced weight - 8 large Big Bore vents for increased airflow and lighter weight - Heat-sealed comfort liner for a clean look and feel

Max-coverage mountain bike gloves with to D3O knuckle guards The Defend D3O is an aggressive trail-ready glove. It combines a stretch Cordura construction with D3O knuckles for comfort and protection. - Premium D3O knuckle guards - Stretch Cordura ripstop construction with compression molded neoprene - TruFeel internal texture for heightened feel and control of levers - Compression molded cuff for secure fit - Touchscreen compatibility - Hook and loop wrist closure style MATERIALS - 40% nylon Cordura, 28% nylon66, 20% Pet, 12% spandex

Feel the bars like never before. The Flexair Race Gloves are minimalist gloves with an exceptional fit and lightweight feel. The stretch mesh finger gussets (the fabric between your fingers) increase flexibility as well as help channel air through the gloves for superior comfort. The Flexair gloves also feature a conductive thread on the thumb and index finger so you can use your phone without removing your gloves. With their race-ready vibe, these gloves will help you feel as fast as you look.

Style and performance that works on and off the bike. The Ranger drirelease Tred Mid Long Sleeve Jersey has a soft feel and relaxed fit which conceals advanced moisture-wicking technology. Featuring subtle Fox branding, it'll keep you comfortable on the trail while providing the feel of your favorite tee, and has long sleeves for that added bit of coverage as you’re out getting your shred on. Constructed with drirelease, the jersey wicks sweat and dries quickly so you can take a ride on your lunch break and get away with it. - The drirelease yarns wick moisture and dry four times faster than cotton - Full garment utilizes recycled fabrics - 85% recycled polyester, 15% cotton drirelease jersey

The Defend Winter Socks keep your feet comfortable and warm on the most demanding winter rides. Made from wool and featuring trail-specific cushion at the heel, toe, and shin, you'll be able to ride longer, more comfortably down the gnarliest of trails in these socks. The compression arch and flat-toe construction kicks up comfort even further while providing a snug and superior fit, while the rib knit upper means these socks will stay up for the whole ride. - Compression arch support for superior fit and comfort - Trail specific cushion at heel, toe, and shin - Rib knit upper won’t slide down when the trail gets rough - Flat-stitch toe construction offers improved comfort - 68% wool, 24% polyamide nylon, 6% polyester, 2% elastane

Durability-Focused Mountain Bike Gloves The Defend Gloves are a perfect mix of lightweight top hand material and a minimal, yet extremely durable palm. The stretch mesh finger gussets (the fabric between your fingers) increases flexibility as well as helps channel air through the glove for superior comfort. Touchscreen compatibility is an additional feature for taking those epic mid-ride photos when the weather breaks. - 4-way stretch polyester construction - Single-layer Clarino palm with strategically placed perforations - Stretch mesh finger gussets for improved airflow and movement - Compression-molded cuff for secure fit - TruFeel internal texture for heightened feel and control of levers - Touchscreen compatibility - Hook-and-loop wrist closure style MATERIALS - 40% nylon Cordura, 28% nylon66, 20% PET, 12% spandex